Recording method |
3-color exposure with OLED |
Film used |
FUJIFILM instax WIDE Instant Film (sold separately)
|
Number of films |
10 films/pack |
Image size |
62mm×99mm |
Supported image size |
800 × 1260 dot
|
Printing resolution |
12.5 dots/mm (318 dpi, 80 μm dot pitch)
|
Printing levels |
256 levels per color (RGB)
|
Interface |
Standard compliance: Bluetooth Ver. 4.2 (BLE) |
Supported image format |
JPEG, PNG, HEIF, DNG |
Printing time |
Image recording - photo output (fed out): Approximately 12 sec. |
Approximate printing capacity |
Approximately 100 prints (from full charge) *The number of prints depends on the usage conditions. |
Power supply |
Lithium ion battery (internal type: not removable) |
Charging time |
Approximately 80 to 120 minutes (Charging time depends on the temperature and battery remaining level) |
Power consumption |
Approximately 3 W |
Operating environment |
Temperature: +5 oC to +40 oC Humidity: 20% to 80% (no condensation) |
Main unit dimensions |
139mm×127.5mm×33.7mm(excluding projecting parts) |
Main unit mass |
Approximately 340 g (excluding film pack) |
Supplied accessory |
USB cable (BOD700-101, Length: 30 cm) Stand (1) Strap (1) |